KUHN ATHENOR 6070, Руководство оператора

Страница: 83 / 98

Maintenance and storage
Silo unloader - Straw spreader - Mixer - Distributor
ATHENOR 6070
81
6. Checking and adjusting the sections
- External regulator combs (1):
• They must be centered relative to the sections
passing on each side.
- Internal regulator combs (2):
• The distance 'd'' between these regulator combs
and the sections must be less than 10 mm.
- The unbevelled side must be on the regulator comb
side to obtain optimal product cutting.
To adjust the position of the regulator combs relative to
the sections, add or remove spacer shims (Part no.:
A5204400).
To guarantee optimum cutting, the edges of the sections
must be kept sharp. Sharpen or replace them as
necessary..
You can also swap sections around in order to use both
cutting edges of each section.
Regularly check the position of the regulator
combs relative to the sections.
Be very careful when replacing sections. You
run a very serious risk of cutting yourself
(between the regulating tines and the
sections).