Kudux LM 2013, Руководство пользователя

Страница: 14 / 24

Menu options
The sections below explain how to access the fixture options shown in the menu map.
The SET Menu
Reset Machine
When you set this menu item on, the fixture performs a reset.
Selecting the
OFF option will have no effect. To reset the fixture:
1. Press <Set/Esc> until SET appears on the display. Press <Enter>
2. Scroll to the
Reset Machine menu. Press <Enter>.
3. Scroll to ON to reset the fixture.
4. Press <Enter>.
Load Parameter
When you set this menu item on, all factory options return to their default settings. Conic
Lighting Designs TM fixtures are shipped from the factory with the following default option
settings:
Reverse Pan: OFF
Reverse Tilt: OFF
Pan Degree: 540º
Dimming curve: Square law
Dimmer speed: Smooth.
DMX Reset: Enabled
Fan Speed: Auto regulated.
No DMX signal: Stop Run
DMX Channels: Stage 12 channels
The Load Parameter menu option displays On if all the factory options are at the factory
default settings. If any of the items listed above are not at the factory default setting, the
display reads OFF . Selecting the OFF option will have no effect. To restore the factory default
setting:
1. Press <Set/Esc> until SET appears on the display. Press <Enter>
2. Scroll to the
Load Parameter menu. Press <Enter>.
3. Scroll to ON to restore the factory option defaults.
4. Press <Enter> to store.
Master / Alone
The Master/Alone menu option sets the fixture mode to master or stand alone. To set the
fixture to any of the two modes:
1. Press <Set/Esc> until SET appears on the display. Press <Enter>
2. Scroll to the
Master/Alone menu. Press <Enter>.
3. Scroll to the desired mode .
4. Press <Enter> to store.
Auto / Sound
The Auto/Sound menu option sets the fixture mode to Auto run mode or to sound mode. To set
the fixture to any of the two modes:
! ! ! ! ! ! ! ! 16