Kudux Hot Mix 15R, Руководство пользователя

Страница: 8 / 16

WWW.KUDUX.COM 8
Live wire(L) Null(N) Ground wire
RED BLUE Green
5.
Lamp
5.1. Lamp description
LAMP MODEL POWER OF LAMP
LIFE/HOUR COLOR TEMPERATURE
OSRAM SIRIUS HRI
440W
6000 HOURS
7800K
WARNING!
There is a safety hazard or damage if install similar bulb to reduce the risk
of damage to light, do change the lamp before using time over 90% of
lamp life.
5.2. Lamp replace
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament. filament must be kept clean. Disconnect the
power. Before replace lamp, fixture need 20 minutes for lamp cooling.
1. Fasten the head with Y axis protect lock in 60 ° position.
2. Use cross screwdriver to open the light body cover, remove the fan bracket, pull out the bulb
cable as this picture show:
3. Please loose the connect wire as the following
4. Please loose the screws installed in the metal pieces as following.
5. Press the lamp reflector slightly use one finger, and press the lamp bottom slightly use
another finger. So, the lamp will loose from the stand.
6. Repeat the above steps on the contrary action to install the lamp.
6. Display menu
CHANNEL
CHANNEL MODE
STANDARD VECTOR
1 CYAN COLOUR WHEEL CYAN COLOUR WHEEL
2 MAGENTA COLOUR WHEEL MAGENTA COLOUR WHEEL
3 YELLOW COLOUR WHEEL YELLOW COLOUR WHEEL
4 COLOUR 1 COLOUR 1
5 COLOUR 2 COLOUR 2
6 COLOUR 3 COLOUR 3
7 STOPPER / STROBE STOPPER / STROBE
8 DIMMER DIMMER
9 DIMMER FINE DIMMER FINE
10 STATIC GOBO CHANGE STATIC GOBO CHANGE