Kudux Hot BEAM 2R, Руководство пользователя, Страница: 7 / 19

WWW.KUDUX.COM 7
power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
3.6. To prevent burning or fire
•
The fixture can be mounted directly on the surface of ordinary combustible material.
•
Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
•
The equipment must be installed away from inflammable and explosive materials.
•
The equipment should be projected range of 3 meters away objects and projectiles
temperature less than 60 ° C;
•
Fan or ventilation, at least in the range of 0.5 meters cannot be an obstacle.
•
Do not place any object on the lens.
•
Handling at least allow the device to cool for 20 minutes.
•
Do not replace the non-original parts.
4.
Package
4.1. Attachment
HOT BEAM 2R packed with fly-case of one in one, two in one, or carton box. Attach follow
accessory.
ACCESSORY
CONTENT QUANTITY
USER MANUL 1 piece
CLAMP (option) 2 pcs
SIGNAL CABLE 1 piece
4.2. Transport protect lock
To protect the light, there is a protect lock; During the transport, the lock will have closed
keeping the item in safety state.
4.3. About pack stage
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before cleaning the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock
the fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam first, then set into a
carton, pay attention to the vertical position.