10
6.
Madrix software configuration.
Computer operation Usage steps (the controller is used in ARTNET mode):
After the
controller is connected to the computer, set the
IP and subnet mask of the computer, and notice that the
IP address of the PC side is in the same network
segment as the IP address of the controller (for example,
if the controller IP is 192.168.1.10, the IP of the PC side
should be set to 192.168.1.X, when X is 0
≤
255and not
10). The IP address of the controller can also be set by
the controller to adapt to the network segment on the
PC side. The PC subnet mask is fixed to 255.255.255.0.
Open the MADRIX software, click Devices Manager in preferences to select the
Art-Net option, and click the icon Search for the device, as shown in the figure to
search for a controller called CLEN-Artnet.
Select the DMX device option, select all output ports, select enable and apply.
