KFR11AC-128R-16F
11
5GHz (A+N+AC)
- Select if you are using both 802.11a, 802.11n and 802.11ac
wireless clients.
Mode:
Support AP, Client, WDS and AP+WDS mode.
Network Type:
This type is only valid in client mode.
SSID:
Service Set Identifier, it identifies your wireless network.
Channel Width:
Select the channel width from the drop-down list.
ControlSideband:
This relates to the channel number used for your wireless network. An
upper band represents higher channels and vice versa.
Channel Number:
Indicates the channel setting for the router.
Enable Mac Clone:
Enable or disable MAC clone option. (You can use the "Mac Clone"
button to copy the MAC address of the Ethernet Card installed by your ISP and replace
the WAN MAC address with this MAC address.)
Wireless 5GHz Security Setup
Secure your wireless network by turning on the WPA or WEP security feature on the
router. This section you can set WEP and WPA-PSK security mode.
The following picture shows how to set the WEP security.
Key Length:
Specify the Length of the key, 64-bit or 128-bit.
Key Format:
Specify the format of the key, ASCII or hex.
Key Setting:
Enter the key here, its format is limited by the key format, ASCII or Hex.
The following picture shows how to set WPA-PSK security, you can select WPA (TKIP),
WPA2 (AES) and Mixed mode.
