Kudos Audio
• Harvey Court • Low Willington • Industrial Estate • Willington • County Durham • DL15 0UT
t
+44 (0) 845 458 6698
e
w
kudosaudio.com
CONNECTIONS
The Titan 808 loudspeakers can be either passively or actively driven. In a passive system the output from a power
amplifier is passed through the crossover housed inside the loudspeakers. Titan 808 loudspeakers are configured
from the factory for passive operation.
To maintain correct phase make sure to connect the red “+” amplifier connection to the corresponding red “+”
passive input speaker connection and the black “
-
“ amplifier connection to the corresponding black “
-
“ passive input
speaker connection.
Your Titan 808 loudspeaker is fitted with WBT Nextgen binding posts on the top and bottom cabinets and the
crossover components for each section are linked to these. This allows you to bi amp the loudspeaker with the bass
section driven separately or bi wire from one amplifier to the two sections. For those preferring to use single wire
operation high quality Chord Signature links have been supplied to connect the upper and lower sections together.
Again care should be taken to ensure the red “+” and black “
-
“connections are linked to maintain correct phase and
that the cable direction markers are
maintained throughout.
If you wish to use your Titan 808 loudspeakers in an active configuration you will need one amplifier channel for
each drive unit in the speakers and a suitable, Kudos approved, active crossover. Incorrect connection may result in
serious damage to your loudspeakers. For further information contact your retailer or distributor or visit
kudosaudio.com/upgrade-to-active
POSITIONING
The Titan loudspeaker has been designed to work in a wide range of rooms and should be easy to site. As a general
guide they should be placed 2m apart and at least the same distance from the main listening position. Titan is a
ported design but is ported into the Fixed Boundary Gap between the two cabinets to minimise the effects of room
boundaries.
