5
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: KE-7096 PRODUCT CODE: 39433 08/2014
• To avoid splattering of boiling water, do not overfill the kettle. Make sure
the water level is above the minimum and below the maximum level.
• Make sure the lid is securely closed before switching on the kettle.
• Never leave the filter loose in the kettle, it must sit securely in place in front
of the spout.
• Do not leave the kettle unattended when it is switched on.
• Unplug the kettle from the outlet when it is not in use.
• Unplug the kettle and allow it to cool before putting on or taking off parts
and before cleaning it.
• CAUTION:
Make sure the kettle is switched off before taking it off its base.
• To disconnect the appliance, make sure the power switch is in the off
position, then remove the plug from the wall outlet.
• Grip the plug when disconnecting, do not pull the cord.
• NOTE:
Should you accidentally allow the kettle to operate without water, the
boil-dry protection will automatically switch it off. If this should occur,
allow the kettle to cool before filling with cold water and re-boiling.
CAUTION: HOT!
• Do not touch any part of the kettle housing when it is in use. The stainless
steel and glass surfaces get hot. Only touch the handle.
• Do not put any part of your hand or body near the kettle when it is switched on.
• Always ensure the lid is closed and do not lift it while the water is boiling.
Scalding may occur if the lid is removed while the water is heating up.
• While water is boiling, or just after the water has finished boiling, avoid
contact with steam from the spout.
• Use extreme caution when moving the kettle containing hot water.
• Always tip the kettle slowly and carefully when pouring boiling water.
• Be careful when opening the lid for refilling; make sure the kettle is not hot.
• Never remove the filter when the kettle contains hot water.
General Safety Instructions (Cont.)
