Kubota ZD221 Скачать руководство пользователя страница 29

Страница: 29 / 95

OPERATING THE ENGINE

ENGLISH

Do not depress the hydraulic lift control pedal.
When the engine is off, depressing the hydraulic lift
control pedal (UP or DOWN) will lower the implement.

3. Make sure that the PTO lever is in the

"DISENGAGED" (OFF) position.

(1) PTO lever

"ENGAGED" (ON)

"DISENGAGED" (OFF)

4. Place the motion control levers in the

"NEUTRAL LOCK" position.

(1) Motion control lever (LH)
(2) Motion control lever (RH)

(A) "NEUTRAL LOCK"
       Position
(B) "NEUTRAL" Position
      (held by hands)
(C) "CREEP" Position
      (hands off)
(D) "FORWARD"
(E) "REVERSE"

5. Release the hydraulic lift control pedal

to the "DOWN" position.

(1) Hydraulic lift control pedal

Depressing: "UP"

Release: "DOWN"

6. Set the throttle lever 1/2 way forward.

(1) Throttle lever

"FAST"

"SLOW"

7. Insert the key into the key switch and

turn clockwise one notch.
Make sure the Easy Checker (TM) lights
are ON.

Содержание ZD221
































































































Результаты поиска

Содержание ZD221

Отзывы:

Kubota ZD221, Руководство оператора, Страница: 29 / 95

Результаты поиска

Содержание ZD221

Отзывы: