• Read and understand the safety labels located
on the machine.
• To avoid the danger of exhaust fume poisoning,
do not operate the engine indoors without
proper ventilation.
• Never start the engine while standing on the
ground. Start the engine only from the
operator's seat.
1. Adjust the operator's position and apply the seat
belt.
• Operator's seat on page 30
• Seat belt on page 30
2. Select light switch positions. (if equipped)
• Light switch (if equipped) on page 30
3. Start the engine.
See OPERATING THE ENGINE on page 24.
4. Raise the implement.
5. Accelerate the engine.
6. Release the parking brake.
• Parking brake lever on page 31
7. Operate the machine.
• Motion control lever on page 31
• Stop position of the motion control lever on
• Operating position of the motion control lever on
1. Operator's seat
WARNING
To avoid serious injury or death:
• Make adjustments to the seat only while the
machine is stopped.
• Make sure that the seat is completely secured
after each adjustment.
• Do not allow anyone other than the driver to
ride on the machine.
(1) Fore-aft adjusting handle
Fore-aft adjustment
Pull the seat adjusting lever and slide the seat.
Armrest (if equipped)
The armrest may be set at the upright position if
desired.
IMPORTANT :
• After adjusting the operator's seat, be sure to
check and see that the seat is securely locked.
2. Seat belt
WARNING
To avoid serious injury or death:
• Always use the seat belt when the ROPS is
installed.
• Do not use the seat belt if a foldable ROPS is
down or if there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is an auto-locking retractable
type.
(1) ROPS
(2) Seat belt
3. Light switch (if equipped)
To turn on the headlights:
Push the light switch forward.
To turn off the headlights:
Push the light switch rearward.
OPERATING THE MACHINE
STARTING THE MACHINE
30
Z231KW-AU
Содержание Z231KW-AU
