48
MAINTENANCE
MAINTENANCE
To avoid personal injury or death:
A
Before doing maintenance work on the machine, place the machine on a firm, flat and level surface, lower
the lift arms slowly to the ground, stop the engine.
Whether the machine is properly lubricated and maintained directly determines the trouble frequency and service life of the
machine. Periodically check and maintain your machine, and you will find in the long run that the jobs can be finished earlier
and more economically.
Shown in the Service Interval Chart below are the hours indicated on the hour meter, practically, it will be convenient to
schedule the time of inspection and maintenance according to the calendar (day, week, month) on the basis of the chart.
If the machine is used in harder-than-usual working conditions, it must be checked and maintained at shorter intervals.
MAINTENANCE INTERVALS
No.
Check points
Measures
Hour meter indicator
Interval
Ref.
page
50
250
500
1000
1500
2000
3000
1
Coolant
check
Daily check
(every 10 hrs)
change
every 2 years
2
Fuel
check
Daily check
(every 10 hrs)
3
Engine oil
check
Daily check
(every 10 hrs)
change
every 250 hrs
4
Hydraulic oil
check
Daily check
(every 10 hrs)
change
every 1000 hrs
*1
5
Greasing
grease
Daily check
(every 10 hrs)
6
Radiator, oil cooler and
fuel cooler
check
Daily check
(every 10 hrs)
7
Engine and
electrical wiring
check
Daily check
(every 10 hrs)
8
Water separator
drain
Daily check
(every 10 hrs)
9
Washer liquid
(closed cab model)
check
Daily check
(every 10 hrs)
10
Battery condition
check
Daily check
(every 10 hrs)
11
V-belt tension
check
Daily check
(every 10 hrs)
adjust
every 250 hrs
12
Evacuator valve
check
Daily check
(every 10 hrs)
clean
every 50 hrs
13
Air cleaner warning indicator
check
Daily check
(every 10 hrs)
14
Fuel tank cap (vent hole)
clean
Daily check
(every 10 hrs)
15
Wheel bolt torque
check
Daily check
(every 10 hrs)
16
Tire pressure
check
Daily check
(every 10 hrs)
17
Fuel tank
drain
every 50 hrs
18
Air cleaner
element
Outer
element
clean
every 50 hrs
*2
@
replace
every 250 hrs
*2
Inner
element
replace
every 250 hrs
*2
19
Radiator hoses and clamps
check
every 250 hrs
replace
every 2 years
Содержание SSV65
