6. Take the 6
¼” piece of 180° weather stripping for the differential lock pedal. Slide the o
-
rubber onto the inside edge of sheet metal in the slot. This will provide a better seal for this
pedal.
7. On the right side of the machine, remove the handle end caps on all of the controls. Then
remove the plastic black shroud around the controls.
Use the next photo as reference for the next five weather stripping installs.
8. For the front left slot, take the 7” and 5 5/8” pieces of 180° weather stripping. Place the 7”
piece on the left side of the slot and the 5 5/8” piece on the right side of the slot.
9. For the front middle slot, take the 8 ½” pi
ece of 180° weather stripping. Slide the bulb onto
the left side of the sheet metal.
June 2021© Kubota Fx80 Series ROPS Cab Installation Manual
