manualshive.com logo in svg

Kubota RA2584, Руководство оператора

Поделиться
Скачать
Kubota RA2584 Скачать руководство пользователя страница 71

Operation

71

Single swath with 

right rotor in transport 

position

The inactive side shaft is removed.

See »Remove the side shaft«, page 70.

Using the tractor's single-acting hydraulic control unit, raise both 
rotors into the transport position until the lift arms lock.

To release them, pull the cable on the mechanical locking 
mechanism for the left rotor and keep tensioned.

Lower the left rotor using the tractor's single-acting hydraulic 
control unit.

Switch on the drive for the PTO shaft at a low speed.

Select a driving speed at which the crop is picked up cleanly and 
completely.

The left rotor picks up the crop.

Single swath with 

left rotor in transport 

position

The inactive side shaft is removed.

See »Remove the side shaft«, page 70.

Using the tractor's single-acting hydraulic control unit, raise both 
rotors into the transport position until the lift arms lock.

To release them, pull the cable on the mechanical locking system 
for the right rotor and keep tensioned.

Lower the right rotor using the tractor's single-acting hydraulic 
control unit.

Switch on the drive for the PTO shaft at a low speed.

Select a driving speed at which the crop is picked up cleanly and 
completely.

The right rotor picks up the crop.

Содержание RA2584





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды