Kubota RA2072 Hydro, Руководство оператора

Страница: 68 / 112

Preparations on the field
68
Preparations on the field
Safety
The following applies for all preparations on the field:
\
WARNING
Observe the safety information
Disregard for safety information can lead to serious or fatal injury.
See chapter »Safety«, page 8.
Switch off the tractor and secure it
Before you dismount:

Disengage the PTO

Lower all implements to the ground

Place all controls in their neutral or park position

Set the parking brake

Switch off the tractor.

Remove the ignition key.

Secure the tractor against rolling away.
An unsecured tractor can run you over or trap you. Otherwise,
serious or fatal injury may be caused as a result.
Avoid the hazard area
The rotors are considered a hazard area. Do not stand in the
hazard area. The rotors may lower or turn. Serious or fatal injury
may be caused as a result.
Securing the machine
Secure the machine against unintentional starting and rolling
away. Use wheel chocks. The machine must stand on a level, firm
and secure surface and be supported during the work, if
necessary. Unsecured or non-supported machines can cause
accidents. Otherwise, serious or fatal injury may be caused as a
result.
No persons in the working area
Ensure that no persons are present in the slewing and working
area of the machine. Persons could be caught by the machine
within this area. This could result in fatal injury.
Close the ball valve
Close the ball valve before adjusting. If the ball valve is open and
there is an operating error, the machine may drop or swing out
unexpectedly. This may cause damage to the machine or
accidents with fatal consequences.
Change the swath width in the headland position
When the rotors are extended with the machine at a standstill, the
tines must not be in contact with the ground. Only change the swath
width in the headland position. Otherwise, the machine may be
damaged.
No ground contact
When the rotors are extended with the machine at a standstill, the
tines must not be in contact with the ground. Otherwise, the
machine may be damaged.