Coupling the machine
31
Coupling to the
pending attachment
For coupling to a pending attachment in accordance with ISO 6489-3,
proceed as follows:
(A) Distance between the PTO shaft drive and the drawbar hitching
point: approximately 356 mm.
(B) Height between the PTO shaft drive and the drawbar hitching
point: approximately 203 – 305 mm.
(C) Fix the lower link height at a distance of approximately 400 mm
from the ground.
Couple the rotary rake to the pending attachment with a fixing pin.
Secure the fixing pin with a safety splint.
Take the height-adjustable parking stand out of the transport
holder bracket and fit it to the drawbar.
See »Coupling to the lift link drawbar«, page 32.
The working depth is adjusted on the chassis.
Chapter »Preparing for use«, section »Rotor pitch«, page 39
Lock the height adjustment of the lower link
Lock the height adjustment of the lower link. Comply with the
tractor operating manual. Unintentionally raising the lower links
can irreparably damage the PTO shaft.
Lock the lateral setting of the lower links
Fix the lower links after coupling the implement. Lateral free
movement of the lower links causes unstable drive properties
during transport journeys and can cause accidents.
Height-adjustable parking stand
Safety splint
Fixing pin
