manualshive.com logo in svg

Kubota R540, Руководство оператора

Поделиться
Скачать
Kubota R540 Скачать руководство пользователя страница 49

(1) Coolant temperature warning

indicator

(2) Engine warning indicator
(3) Warning message

(A) Blinking
(B) Lighting

CHECKS FOR THE SAFETY

LEVERS AND THE APPLIANCE

1. Safety key start system

Safety-key-start system is the safety system to prevent
the machine from moving suddenly.
The safety-key-start system does not allow the engine
to start when the parking brake is released.

2. Lift arm support

The  lift-arm-support  prevents  the  loader  lift  arms  from
falling when servicing the machine.

(1) Lift arm support device

2.1 Installing the lift arm support

 WARNING

To avoid personal injury or death:

• Before  installing  the  lift-arm-support,  remove

the front attachment, set the direction switch to
the neutral position, and remove the starter key.

1. Remove the front attachment.
2. Raise the loader lift arms completely.
3. Stop the engine and remove the starter key.
4. Insert the lift-arm-support onto the lift-cylinder-rod.
5. Install the pin and snap pin in the lift-arm-support.

CHECKS FOR THE SAFETY LEVERS AND THE APPLIANCE

 CHECKS BEFORE STARTING THE MACHINE

R540

45

Содержание R540



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды