Kubota R430, Руководство оператора

Страница: 60 / 112

2. While adjusting the vertical movement of the
bucket, lift the bucket so that sand can be removed
by layers. Continue lifting the bucket as you
advance the machine.
3. Refilling
1. Direct the bucket horizontally and push the piled
sand toward the ditch.
2. When the bucket reaches the ditch, dump the
bucket to discharge the sand into the ditch.
4. Leveling the ground
1. Dump and tilt the bucket alternately to distribute the
soil from the bucket over the ground as you move
the machine backward.
2. Then, dump the bucket, lower the bucket, and move
the machine backward so that the blade scratches
the ground surface.
3. Direct the bucket horizontally, set the lift arms in the
“FLOATING” position using the control lever, and
level the ground while backing the machine.
(1) Control lever
(2) Control lever lock knob (A) Lock
(B) Unlock
5. Loading method onto a truck
Examine the job site situation and choose the efficient
loading method that minimizes the swivel angle and
moving distance.
• Cross loading method
(See Loading onto a truck by cross loading method
on page 56)
• V-shift loading method
(See Loading onto a truck by V-shift loading method
on page 57)
5.1 Loading onto a truck by cross loading
method
Cross-loading-method is the fastest and leads to the
shortest cycle time.
1. Position a truck perpendicular (90 degrees) to the
shoveling direction of the machine.
2. After digging and shoveling with the bucket, move
the machine backward.
3. Then drive the truck to a point between the machine
and the piled sand.
OPERATION OF THE MACHINE TYPICAL JOBS USING A WHEEL LOADER
56
R430