Kubota M5040, Руководство по ремонту

Страница: 79 / 559

G-57
M5040, M6040, M7040, WSM G GENERAL
Balancer Shaft 1 Bearing A Replacing Tool
Application: Use to press fit the bearing.
A 18 mm (0.7087 in.) T 23 mm (0.9055 in.)
B 130 mm (5.1181 in.) U 0.349 rad (20 °)
C 1.2 mm (0.0472 in.) V 24 mm (0.9449 in.)
D 34 mm (1.3386 in.) W 12 mm (0.4724 in.)
E 99 mm (3.8976 in.) X 12 mm (0.4724 in.)
F
4.000 to 4.018 mm dia., 7 mm depth
(0.1575 to 0.1582 in. dia., 0.2756 in. depth)
Y 12 mm (0.4724 in.)
G 53 mm dia. (2.0866 in. dia.) Z 4 mm (0.1575 in.)
H 48.8 to 48.9 mm dia. (1.9213 to 1.9252 in. dia.) a 3 mm (0.1181 in.)
I 0.523 rad (30 °) b 35 mm (1.3780 in.)
J 40 mm dia. (1.5748 in. dia.) c 53 mm (2.0866 in.)
K 20 mm dia. (0.7874 in. dia.) d 3 mm (0.1181 in.)
L 34.9 to 35.0 mm dia. (1.3740 to 1.3780 in. dia.) e 2 mm (0.0787 in.)
M 1.5 mm (0.0591 in.) f Ra = 3.2 a
N 5.5 to 6.5 mm (0.2165 to 0.2559 in.) g 0.8 mm radius (0.0315 in. radius)
O 33 mm (1.2992 in.) h 0.3 mm radius (0.0118 in. radius)
P 134 mm (5.2756 in.) i 7.0 mm radius (0.2756 in. radius)
Q 167 mm (6.5748 in.) j 0.4 mm radius (0.0157 in. radius)
R 1.526 rad (87.5 °) C0.5 Chamfer 0.5 mm (0.0197 in.)
S 35 mm dia. (1.3780 in. dia.) C1 Chamfer 1.0 mm (0.0394 in.)
(1) Shaft (2) Stopper
KiSC issued 06, 2008 A