SAFETY PRECAUTIONS - continued
OM 0427SBC-A
7
Subframe & Snowblower Operation
1.
Before leaving the tractor/snowblower
unattended, take all possible precautions.
Park the tractor/snowblower on level
ground, place the transmission in neutral,
set the parking brake, disengage the
PTO, lower the snowblower to the ground,
place all levers including auxiliary control
levers in neutral, shut off the engine and
remove the ignition key.
2.
Before starting the tractor/ snowblower,
remove
the
ice
that
might
have
accumulated on the auger/fan, inspect
and clean every rotating part.
3.
Prior to operation, clear work area of all
objects that can be picked up and thrown.
Mark all curbs, pipes, etc. that cannot be
moved.
4.
Be sure the PTO switch/lever is in
OFF/disengaged position before starting
engine.
5.
Exercise extreme caution when operating
on or crossing a gravel drive, walks, or
roads. Stay alert for hidden hazards or
traffic.
6.
Do not carry passengers.
7.
Keep clear of all rotating parts. Do not put
hands or feet under, or into snowblower
and subframe with engine running. Be
especially observant of the snowblower
areas of discharge, intake or all other
mechanical motions.
8.
For your safety, do not work under any
hydraulically supported machine elements
that may creep down, suddenly drop or
be accidentally lowered.
9.
Park the tractor/snowblower on level ground, place
the transmission in neutral, set the parking brake,
disengage the PTO, lower the snowblower to the
ground, place all control levers in neutral, shut off
the engine, remove the ignition key and allow the
rotating parts to stop BEFORE unclogging the
housing or the chute and making any repairs,
adjustments or inspections. Use only a 36" long
stick of wood to unclog the snowblower.
10.
If the snowblower starts to vibrate abnormally,
disengage the PTO, stop the engine immediately
and check for cause. Excessive vibration is
generally a sign of trouble.
11.
Do not run the engine indoors except when starting
engine and transporting attachment in or out of
building. Carbon monoxide gas is colorless,
odorless and deadly.
12.
Do not attempt to operate on steep slopes. If
operating on slopes is necessary, exercise extreme
caution when changing direction.
13.
Never operate snowblower without guards, and
other safety protective devices in place. All tractor
and snowblower shields and covers must be
correctly installed at all times. When necessary to
remove
these,
they
must
be
reinstalled
immediately.
14.
Never operate snowblower near glass enclosures,
automobiles, window wells, embankments, etc.,
without proper adjustment of snow discharge angle.
15.
Never operate machine at high transport speeds on
a slippery surface.
16.
Use extra caution when backing up.
17.
Disengage power to auger/fan when transporting or
when not in use.
18.
Never operate the snowblower without good
visibility and lighting.
19.
Prolonged exposure to loud noise can cause
impairment or loss of hearing. Wear a suitable
hearing protective device such as earmuffs or
earplugs to protect against objectionable or
uncomfortable noises.
Содержание L4474
