Kubota KUBOTA RTV-XG850 Скачать руководство пользователя

Страница: 33 / 99

• The parts such as the muffler may be hot. Be

careful not to get burned in connecting jumper
cables.

When jump starting the engine, follow the instructions
below to safely start the engine.
1. Bring helper vehicle with a battery of the same

voltage as the disabled vehicle within easy cable
reach.

IMPORTANT :

• The vehicles must not touch.

2. Engage the parking brake of both vehicles and put

the shift lever in neutral. Shut the engine off.

3. Put on safety goggles and rubber gloves.
4. Ensure the vent caps are securely in place. (if

equipped)

5. Attach the red clamp to the positive (red, (+) or

pos.) terminal of the dead battery and clamp the
other end of the same cable to the positive (red, (+)
or pos.) terminal of the helper battery.

6. Clamp the other cable to the negative (black, (-) or

neg.) terminal of the helper battery.

7. Clamp the other end to the engine block or frame of

the disabled vehicle as far from the dead battery as
possible.

8. Start the helper vehicle and let its engine run for a

few moments. Start the disabled vehicle.

9. Disconnect the jumper cables in the exact reverse

order of attachment. (Steps 7, 6 and 5).

Connect cables in numerical order.
Disconnect in reverse order after use.

(1) Dead battery
(2) Jumper cables
(3) Helper battery

IMPORTANT :

• This vehicle has a 12 volt negative (-) ground

starting system.

• Use only same voltage for jump starting.
• Use of a higher voltage source could result

in severe damage to vehicle's electrical
system.
Use only matching voltage source when
“Jump starting” a low or dead battery.

OPERATING THE ENGINE

RTV-XG850

Содержание KUBOTA RTV-XG850




































































































Результаты поиска

Содержание KUBOTA RTV-XG850

Отзывы:

Похожие инструкции для KUBOTA RTV-XG850

Бренды по названию

Популярные бренды

Kubota KUBOTA RTV-XG850, Руководство оператора

Результаты поиска

Содержание KUBOTA RTV-XG850

Отзывы:

Похожие инструкции для KUBOTA RTV-XG850

Бренды по названию

Популярные бренды