Kubota DF972-E2, Руководство по ремонту, Страница: 96 / 138

S-26
WG972-E2, DF972-E2, WSM GASOLINE / LPG ENGINE
Resistance of Ignitor
1. Disconnect the connector.
2. Measure the resistance with an ohmmeter.
3. If the resistance is not with in the factory specifications, replace it.
W1109304
Ignitor Check Chart
NOTE ■
• This check sheet shows the results of the test conducted by using the "FLUKE MULTMETER 110 SERIES"
(degital meter).
• Use of other testers than those above may show different measured results.
Negative
Positive
A B C D E F G H
A 10 to 40 k
Ω
10 to 40 k
Ω
11 to 47 k
Ω
infinity infinity infinity infinity
B 10 to 40 k
Ω
0.33 to 1.3 k
Ω
1.8 to 7.3 k
Ω
infinity infinity infinity infinity
C 10 to 40 k
Ω
0.33 to 1.3 k
Ω
1.5 to 6.0 k
Ω
infinity infinity infinity infinity
D 11 to 47 k
Ω
1.8 to 7.3 k
Ω
1.5 to 6.0 k
Ω
infinity infinity infinity infinity
E infinity infinity infinity infinity infinity infinity infinity
F
2 megohm
(minimum)
2 megohm
(minimum)
2 megohm
(minimum)
2 megohm
(minimum)
infinity infinity infinity
G
2 megohm
(minimum) 2 megohm
(minimum) 2 megohm
(minimum) 2 megohm
(minimum)
infinity infinity infinity
H
2 megohm
(minimum) 2 megohm
(minimum) 2 megohm
(minimum) 2 megohm
(minimum)
infinity infinity infinity
KiSC issued 01, 2006 A