Page No. 9
Kubota Emission-Related Installation Instructions
Document Number : KEA-STD-03-CRS-DOC-001-
④
Appendix 5
Engine Model
10 Digit Code
Maximum Back Pressure
Remarks
D1803- CR- TIE4B- KEA- 1
1J497- 10000
50 mm Hg
Industrial
D1803- CR- TIE4B- KEA- 2
1J497- 20000
50 mm Hg
Industrial
D1803- CR- TIE4BG- KEA- 1
1J478- 10000
40 mm Hg
BG
V2403- CR- TIE4B- KEA- 1
1J498- 10000
50 mm Hg
Industrial
V2403- CR- TIE4B- KEA- 2
1J498- 20000
50 mm Hg
Industrial
V2403- CR- TIE4BG- KEA- 1
1J488- 10000
40 mm Hg
BG
1. Exhaust System
Back pressure of exhaust tail pipe at full load, rated speed condition must be according to table below.
Measurement point of back pressure of exhaust system is within 1” (25.4 mm) of the DOC outlet.
1-2-1.A Factory Mounted Installation Position (DOC): Exhaust Back Pressure Check
Back Pressure Measurement
Location