Kubota BH92, Руководство по сборке, Страница: 17 / 20

14
3. Wind the sealing tape around the backhoe outlet hose.
Attach sleeve by band cord, male coupler and cap to
the outlet hose.
4. Connect the joints as shown below and connect the
backhoe inlet hose and backhoe outlet hose. Then
tighten the bolts using torque.
5. Connect the backhoe inlet hose to the coupler joint.
6. Lower the operating seat and tighten each bolt.
7. Connect the male coupler to the female coupler.
Pass the outlet hose through the coupler joint hose
guide.
(1) Backhoe outlet hose (Green)
(2) Male coupler
Thread size:1/2 - 14 NPT
Tightening torque: 49 to 58 N·m
(5.0 to 5.9 kgf·m, 36 to 43 lbf·ft)
(3) Cap
(4) Sleeve
(5) Band cord
(1) Backhoe outlet hose
(2) Backhoe inlet hose
Thread size: 3/4 - 16 UNF
Tightening torque: 36 to 40 N·m
(3.7 to 4.1 kgf·m, 27 to 30 lbf·ft)
(3) Joint
Tightening torque: 90 to 108 N·m
(9.2 to 11.0 kgf·m, 67 to 79 lbf·ft)
(4) 2-M8 bolts
Tightening torque: 23.6 to 27.4 N·m
(2.4 to 2.8 kgf·m, 17.4 to 20.2 lbf·ft) (A) 10
(1) Backhoe inlet hose
Thread size: 3/4 - 16 UNF
Tightening torque: 36 to 40 N·m
(3.7 to 4.1 kgf·m, 27 to 30 lbf·ft)
(2) Coupler joint
(1) Male coupler
(2) Female coupler
(3) Outlet hose (Green)
(4) Coupler joint