Kubota B26TL Скачать руководство пользователя

Страница: 41 / 105

OPERATING THE TRACTOR

Tilt Steering Adjustment

To avoid personal injury:

Do not adjust the steering wheel while the
tractor is in motion.

Press down the steering wheel tilt pedal, to release the
lock so the steering wheel can be adjusted to one of three
desired positions.

Head Light / Turn Signal / Hazard Light

Switch

Head Light Switch

(A)

.....Head light OFF.

(B)

.....Head light ON.

(C)

...Head light, Work light ON.

Hazard Light

1. When hazard light switch is pushed, the hazard lights

flash, along with the L/H and R/H indicators on the
instrument panel.

2. Push hazard light switch again to turn off the hazard

lights.

Turn Signal with Hazard Light Switch On.

1. To indicate a right turn with the hazard lights already

flashing (hazard switch on), turn the turn signal switch
clockwise.

2. To indicate a left turn with the hazard lights already

flashing, turn the turn signal switch counterclockwise.

3. When the left or right turn signal is activated in

combination with the hazard lights, the indicated
turning light will flash and the other will stay on.

Turn Signal with Hazard Light Switch Off

1. To indicate a right turn without hazard lights (hazard

switch off), turn the turn signal switch clockwise.

2. To indicate a left turn without hazard lights, turn the

turn signal switch counterclockwise.

3. When the left or right turn signal is activated without

the hazard lights, the indicated turning light will flash
and the other will stay on.

The hazard light switch is operative when the key
switch is in either the "ON" or "OFF" positions.

The turn signal light switch is only operative when the
key switch is in the "ON" position.

The indicator in the hazard light switch will light up
when the head light switch is turned on.

Be sure to return the turn signal switch to center
position after turning.

(1) Steering wheel tilt pedal

(A) "PRESS DOWN"

2. Selecting light switch positions.

(1) Head light switch
(2) Turn signal light switch

(1) Turn signal light switch
(2) Head light switch
(3) Hazard light switch
(4) Hazard / Turn signal indicator

Содержание B26TL










































































































Результаты поиска

Содержание B26TL

Отзывы:

Похожие инструкции для B26TL

Бренды по названию

Популярные бренды

Kubota B26TL, Руководство оператора

Результаты поиска

Содержание B26TL

Отзывы:

Похожие инструкции для B26TL

Бренды по названию

Популярные бренды