![Kubota AP-STP25 Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/kubota/ap-stp25/ap-stp25_operators-manual_2008635019.webp)
Section 3: Optional Equipment
4/10/19
AP-STP25 Tree/Post Puller 328-230MK
15
Push Bar Option
Kubota offers a push bar option for the STP25. The push
bar helps keep branches and limbs away from the skid
steer cab when pulling and transporting a tree.
Part Number & Description
328-231A
ASY, PUSH BAR
Push Bar Assembly
Refer to Figure 3-1:
1.
Remove flange locknuts (#3 & #5) and hex head bolts
(#2 & #4) from push bar assembly (#1).
2.
Position push bar assembly (#1) so that the holes on
the push bar mount pads (#7) line up with the slots on
the lower support plate (#6).
3.
Fasten push bar assembly (#1) to the lower support
plate (#6) with four 5/8-11X1 3/4 GR5
bolts (#4) and four hex flange locknuts (#5). Hand
tighten.
4.
Align the holes on the rear legs (#8) with holes (A)
and (B).
5.
Fasten with two 5/8-11X4 GR5 bolts (#2) and two hex
flange locknuts (#3)
6.
Tighten all nuts to correct torque.
Push Bar Option
Figure 3-1
39826
Section 3: Optional Equipment