Kubota AP-SRB1566, Руководство оператора

Страница: 15 / 26

Section 2: Operating Procedures
Table of Contents
11/11/19 AP-SRB1566, AP-SRB1572, & AP-SRB1578 Skeleton Rock Buckets 380-101MK
11
•
Keep load centered, even when stopped. This will optimize
load stability and protect against load shifting.
•
Allow only persons to operate this attachment who have
fully read and comprehended this manual, who are properly
trained to operate the attachment safely, and who are age 16
or older. Serious injury or death can result from the failure
to read, understand, and follow instructions provided in this
manual.
•
Never carry riders on the implement or tractor. Riders can
obstruct the operator’s view, interfere with controls, be
pinched by moving components, become entangled in
rotating components, struck by objects, thrown about, fall
off and be run over, etc.
•
Never make contact with underground utilities such as
electrical power lines, gas lines, phone lines, etc. They can
cause serious injury or death from electrocution, explosion,
or fire. If in doubt, call 811 (USA) before digging so that
they can mark the location of underground services in the
area. For contact information, see Dig Safe in the
“Important Safety Information” starting on page 1.
•
Hydraulic fluid under high pressure can penetrate the skin
and/or eyes causing a serious injury. Wear protective gloves
and safety glasses or goggles when working with hydraulic
systems. Use a piece of cardboard or wood rather than
hands when searching for leaks. A doctor familiar with this
type of injury must treat the injury within a few hours or
gangrene may result. DO NOT DELAY.
•
Operate only power machines equipped with a certified
Roll-Over Protective Structure (ROPS) and seat belt. Keep
folding ROPS in the “locked up” position when
appropriate. If ROPS is in the locked up position, fasten seat
belt snugly and securely to help protect against serious
injury or death from falling and machine overturn.
•
Check hitch fit-up frequently. An improper fit-up can cause
the attachment to come loose from the loader hitch plate
and fall.
•
Do not lift loads that exceed rated lift capacity of
attachment.
•
Lightweight power machines may need weight added to the
rear to maintain steering control and prevent forward
tipping or side tipping caused by a heavy front load. Consult
your power machine Operator’s Manual to determine
proper weight requirements and maximum weight
limitations.
•
Follow recommendations in the power machine Operator’s
Manual when parking or dismounting the power machine.
•
Do not chain or strap loads to the loader arms, hitch, or
attachment. Hitting solid objects with a load fastened to the
attachment or machine can cause the operator to lose
control.
•
Do not use attachment as a lifting device for people or as a
work platform. It is not properly designed or guarded for
this use.
•
Do not use attachment to lift, carry, push or tow other
equipment or objects. It is not properly designed or guarded
for this use. The operator could lose control resulting in
equipment damage and/or tipping hazard.
•
Do not use attachment to pull and/or pry objects out of the
ground or for digging into the ground. It is not properly
designed or guarded for this use.
•
Do not use attachment to lift the front or back of the power
machine off the ground. Doing so can damage the
attachment, power machine, and/or cause serious injury or
death.
•
Do not alter attachment or replace parts on the attachment
with other brands. Other brands may not fit properly or
meet OEM specifications. They can weaken the integrity
and impair the safety, function, performance, and life of the
attachment. Replace parts only with genuine OEM parts.
•
Wear appropriate personal protective gear. Include eye
protection when appropriate and when operating a power
machine without an enclosure or protective shield. Dust and
debris can get into the eyes.
•
Always shut power machine down following the “Shutdown
Procedure” provided in this manual before leaving the
operator’s seat.
•
Always store attachment in a secure position so that it will
not fall over.
•
Avoid exposure to dust containing crystalline silica
particles. This dust can cause serious injury to the lungs
(silicosis). Because crystalline silica is a basic component
of sand and granite, many activities at construction sites
produce dust containing crystalline silica. Trenching,
sawing, and boring of material containing crystalline silica
can produce dust containing crystalline silica.
Power Machine Shutdown Procedure
The following are basic power machine shutdown
procedures. Follow these procedures and any additional
shutdown procedures provided in your power machine
Operator’s Manual before leaving the operator’s seat.
1. Reduce engine speed and shut-off all power to the
attachment.
2. Park on solid, level ground and lower attachment until
it is flat on the ground or on non-concrete support
blocks.
3. If shutting down a tractor, put tractor in park or set
park brake.
4. Turn off engine, and remove switch key to prevent
unauthorized starting.
5. Relieve all hydraulic pressures.
6. If included, raise seat bar and move controls until
both lock.
7. Wait for all components to come to a complete stop
before leaving the operator’s seat.
8. Use steps, grab-handles, and anti-slip surfaces
when stepping on and off the power machine.