manualshive.com logo in svg

Kubota AP-SR2772, Руководство оператора

Поделиться
Скачать
Kubota AP-SR2772 Скачать руководство пользователя страница 30

Section 3: Adjustments 

Table of Contents

4/5/19

AP-SRF2772, AP-SRF2790, AP-SR2772, & AP-SR2790 Powered Rakes 321-120MK

26

Working Position of Side Plates Traveling Forward

(Right-Hand Side Shown)

Figure 3-7

Side Plate Positioning

Side plates are utilized to gather and keep rocks and 
debris in front of the roller for the purpose of distributing 
material over low areas while traveling forward.

Working Position Traveling Forward

Refer to Figure 3-7:

The side plates are attached on the front side to mounting 
tabs (#4) and pins (#1) for gathering and distributing 
material while traveling forward.

1.

Remove linchpin (#5) and side plates (#3).

2.

Install right-hand side plate (#3) on the rake’s right 
front mounting tabs (#4) and guide (#2) over front 
mounting pin (#1).

3.

Secure side plate (#3) with linchpin (#5). 

4.

Repeat steps 1 & 3 to install the left-hand side plate.

39764

Working Position of Side Plates Traveling Backward 

(Right-Hand Side Shown)

Figure 3-8

Working Position Traveling Backwards

The side plates are attached on the back side to 
mounting tabs (#4) and pins (#1) for gathering and 
distributing material while traveling backwards.

Refer to Figure 3-8:

1.

Remove linchpins (#5) and side plates (#3).

2.

Install left-hand side plate (#3) on the rake’s right- 
rear mounting tabs (#4) and guide (#2) over rear 
mounting pin (#1).

3.

Secure side plate (#3) with linchpin (#5). 

4.

Repeat steps 1 & 3 to install the right-hand side plate 
on the back of the left-hand side of the rake.

39769

Содержание AP-SR2772













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды