Kubota AP-SR2672 Скачать руководство пользователя страница 5

Important Safety Information

4/10/19

1

Important Safety Information

Listed below are common practices that may or may not be applicable to the products 
described in this manual.

Safety at All Times

Careful operation is your best 
assurance against an accident. 

All operators, no matter how much 
experience they may have, should 
carefully read this manual and 
other related manuals, or have the 
manuals read to them, before 
operating the power machine and 
this attachment. 

Thoroughly read and understand 
the “Safety Label” section. Read 
all instructions noted on them.

Do not operate the equipment 
while under the influence of drugs 
or alcohol as they impair the ability 
to safely and properly operate the 
equipment.

Operator should be familiar with all 
functions of the skid steer and 
attachment and be able to handle 
emergencies quickly.

Make sure all guards and shields 
appropriate for the operation are in 
place and secured before 
operating the attachment.

Keep all bystanders away from 
equipment and work area.

Start skid steer from the driver’s 
seat with steering levers and 
hydraulic controls in neutral.

Operate skid steer and controls 
from the driver’s seat only.

Never dismount from a moving 
skid steer or leave skid steer 
unattended with engine running.

Do not allow anyone to stand 
between attachment and skid 
steer while hooking-up.

Keep hands, feet, and clothing 
away from power-driven parts.

While transporting and operating 
equipment, watch out for objects 
overhead and along side such as 
fences, trees, buildings, wires, etc. 

Store attachment in an area where 
children normally do not play. 
When needed, secure attachment 
against falling with support blocks.

OFF

REMOVE

Safety Precautions for 
Children

Tragedy can occur if the operator 
is not alert to the presence of 
children. Children generally are 
attracted to attachments and their 
work.

Never assume children will remain 
where you last saw them.

Keep children out of the work area 
and under the watchful eye of a 
responsible adult.

Be alert and shut the attachment 
and skid steer/track loader down if 
children enter the work area.

Never carry children on the power 
machine or attachment. There is 
not a safe place for them to ride. 
They may fall off and be run over 
or interfere with the control of the 
power machine.

Never allow children to operate the 
power machine, even under adult 
supervision.

Never allow children to play on the 
power machine or attachment.

Use extra caution when backing 
up. Before the power machine 
starts to move, look down and 
behind to make sure the area is 
clear.

Skid Steer Shutdown 
And Storage

Reduce engine speed and shut-off 
all power to the attachment. 

Park on solid, level ground and 
lower attachment until it is flat on 
the ground or support blocks. 

Turn off engine, and remove 
switch key to prevent unauthorized 
starting.

Relieve all hydraulic pressures. 

If included, raise seat bar and 
move controls until both lock. 

Wait for all components to stop 
before leaving operator’s seat.

Use steps, grab-handles and 
anti-slip surfaces when stepping 
on and off the skid steer.

Detach and store attachment in an 
area where children normally do 
not play. Secure attachment by 
using blocks and supports.

Look for the Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a 
potential hazard to personal safety involved and extra 
safety precaution must be taken. When you see this 
symbol, be alert and carefully read the message that 
follows it. In addition to design and configuration of 
equipment, hazard control, and accident prevention are 
dependent upon the awareness, concern, prudence, and 
proper training of personnel involved in the operation, 
transport, maintenance, and storage of equipment.

!

Be Aware of 
Signal Words

A signal word designates a degree or 
level of hazard seriousness. The 
signal words are:

Indicates a hazardous situation that, if 
not avoided, will result in death or 
serious injury. 

Indicates a hazardous situation that, if 
not avoided, could result in death or 
serious injury.

Indicates a hazardous situation that, if 
not avoided, may result in minor or 
moderate injury.

WARNING

CAUTION

!

!

DANGER

!

Содержание AP-SR2672





































Отзывы: