manualshive.com logo in svg

Kubota AP-SC4060, Руководство оператора

Поделиться
Скачать
Kubota AP-SC4060 Скачать руководство пользователя страница 27

Section 4: Optional Equipment 

Table of Contents

AP-SC4060 & AP-SC4072 Skid Steer Rotary Cutters 326-765MK

12/14/18

23

Hydraulic Motor and Hose Bundle

Figure 4-4

Operator Protective Door

Figure 4-5

39993

24609

Hydraulic Motor and Hose Bundles

Refer to Figure 4-4:

SC4060

15-26 GPM Motor and Hose Bundle326-846A
27-43 GPM Motor and Hose Bundle326-848A

SC4072

15-26 GPM Motor and Hose Bundle326-860A
27-43 GPM Motor and Hose Bundle326-861A

To meet your skid steer requirements, Kubota offers two 
motor and hose assemblies for the SC4060 and 
SC4072. The bundles are interchangeable and do not 
require adapter kits. Compare your motor’s gpm rating 
located on an attached decal with the gpm ratings above:

If your cutter’s motor and hose assembly is not 
compatible with your skid steer, you should replace it 
with one of the assemblies above.

Protective Door Assembly

Refer to Figure 4-4:

Protective Door Assembly326-024A

The skid steer 

MUST 

be equipped with an Operator 

Protective Door for shielding against flying debris when 
attached to a Rotary Cutter. Kubota offers a universal 
Operator Protective Door shield that attaches to your skid 
steer’s hand hold with two u-bolts. Some notching in the 
shield may be required to fit your particular skid steer 
model. See 

“Operator Protective Door (Optional)” 

on 

page 14 for additional information.

The owner may choose to use a protective door provided 
by their skid steer supplier. Kubota offers a Operator 
Protective Door Kit #S6686 which can be used with the 
Kubota SVL. See your nearest Kubota dealer if 
purchasing this kit.

Содержание AP-SC4060









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды