Kubota AP-PS2072, Руководство оператора

Страница: 22 / 48

Section 3: Operating Procedures
AP-PS2072 & AP-PS2086 Primary Seeders 313-805MK 7/15/19
18
Table of Contents
Operating Checklist
Hazard control and accident prevention are dependent
upon the awareness, concern, prudence and proper
training involved in the operation, transport, maintenance
and storage of the Primary Seeder. Therefore, it is
absolutely essential that no one operates the Primary
Seeder without first having read, fully understood and
become totally familiar with the Operator’s Manual. Make
sure the operator has paid particular attention to:
•
Important Safety Information , pages 1 to 7
•
Section 1: Assembly & Set-Up , page 11
•
Section 3: Operating Procedures , page 18
•
Section 4: Adjustments , page 25
•
Section 5: Maintenance & Lubrication , page 32
Make sure the operator has completed the Operating
Checklist and Inspection below.
General Safety Information
!
DANGER
To avoid serious injury or death:
•
All guards and shields must be installed and in good
working condition. Loose clothing caught on rotating
components can pull a person into the machinery. Hands
and other body extremities can become entangled in the
machinery.
•
Do not use rollers or tires as a step. They can move
suddenly causing a falling hazard against metal protruding
objects even when they appear to be solid against the
ground.
•
Do not let children play on or around the equipment
including when stored. Children and/or equipment can fall.
•
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment
supported by concrete blocks or hydraulics. Concrete can
break, hydraulic lines can burst, and/or hydraulic controls
can be actuated even when power to hydraulics is off.
Operating Checklist

Check Page
Read and follow all safety information carefully.
Refer to “Important Safety Information”.
Page 1
Make sure all guards and shields are in place.
Refer to “Important Safety Information”.
Page 1
Read and follow hook-up & preparation.
Refer to “Section 1: Assembly & Set-up”.
Page 11
Read and follow all operating procedures.
Refer to “Section 3: Operating Procedures”.
Page 18
Read and make all required adjustments.
Refer to “Section 4: Adjustments”.
Page 25
Read and follow all maintenance instructions.
Refer to “Section 5: Maintenance & Lubrication”.
Page 32
Read and follow all lubrication Instructions.
Refer to “Lubrication Points”.
Page 34
Check the Primary Seeder initially and periodically
for loose bolts and pins. Refer to “Torque Values
Chart”.
Page 40
•
Do not allow bystanders or animals to be near the
attachment, loader arms, or power machine during
operation. They can become entangled, pinched, or crushed
by the equipment.
!
WARNING
To avoid serious injury or death:
•
Always be aware of your footing and surroundings when
working on or around the Seeder. Be especially careful
while standing on the walkway. Something as simple as a
misstep can cause a person to fall and get seriously injured.
•
Perform scheduled maintenance. Check for loose
hardware, missing parts, broken parts, structural cracks,
and excessive wear. Make repairs before putting equipment
back into service. Serious breakdowns can result in injury
or death.
•
Never carry riders on the equipment or power machine.
Riders can obstruct the operator’s view, interfere with
control of the equipment, be pinched by moving
components, become entangled in rotating components, be
struck by objects, be thrown or fall from the equipment, etc.
•
Backup alarm must be in good working order to warn
others. Use a backup camera or rear-view mirror that is in
good condition to help see undesirable situations behind the
unit. Drive at a slower speed to compensate for blind spots.
•
Do not use equipment to lift objects; to pull objects such as
fence posts, stumps, etc; or to push objects. The unit is not
designed or guarded for these uses.
•
Use steps, grab-handles, and anti-slip surfaces on the
power machine and equipment to get on and off the power
machine. Using unapproved stepping surfaces and/or
handholds can result in a falling hazard.
•
Allow only persons to operate this equipment who have
fully read and comprehended this manual, who are properly
trained to operate the attachment safely, and who are age
16 or older. Serious injury or death can result from the
failure to read, understand, and follow instructions
provided in this manual.
•
Make sure controls are all in neutral position or park before
starting the power machine.
•
Always shut power machine down using the “Shutdown
Procedure” provided in this manual before servicing,
adjusting, cleaning, or maintaining the equipment.
•
Always operate attachment while seated with seat belt
properly fastened around the operator. When equipped,
always lower seat/lap bar(s). This will help protect the
operator against rollovers and sudden stops.
•
Avoid hitting solid objects with this attachment. Solid
objects can damage equipment and throw operator forward
causing loss of control, bodily injury, or death. Always wear
the seat belt.
•
Dress properly for the job. Do not wear loose fitting
clothing or clothing with pull strings. Keep long hair tucked
in. Clothing and hair can become entangled in rotating
components. Wear footwear that will improve footing on
slippery surfaces.
Section 3: Operating Procedures