Kubota 50740, Руководство по эксплуатации

Страница: 81 / 194

Operation
RG268-8135-6
79
01/2019
The time (1) indicates the current time of day in hours and minutes.
The speed indicator display indication (2) indicates the current en-
gine speed.
The hour of operation indicator (3) indicates the hours of operation
of the excavator performed up to now, regardless of the engine
speed.
Check the displays and indicators during operation (page 79).
Stopping the engine

Push throttle lever in the following direction .

Raise the left control console.

Turn the starter switch to the STOP position and remove the key.
Observation of the displays after starting and during operation
The operator must observe the display indicators and displays after starting and during operation.
If the engine is to be stopped to take the excavator out of operation, the services for taking the ex-
cavator out of operation (page 107) must be carried out.
If the engine cannot be turned off, please enable the engine stop knob (page 26).
The warning light (1) flashes red when a system fault
or technical malfunction occurs. Stop the engine im-
mediately! The warning light flashes yellow when the
system issues a warning. Additionally, the display may
show an error as in the figure on the right.
Clear the messages by taking appropriate steps, see
Troubleshooting: Display indications (page 130), or
contact skilled personnel if necessary.
2
3
1