Kubota 50740, Руководство по эксплуатации

Страница: 70 / 194

68
RG268-8135-6
01/2019
Operation
Coolant radiator and oil cooler - check

Walk-around inspection of coolant radiator (1) and oil cooler (2)
for tightness and dirt.
If there is any dirt etc. on the radiators:

Clean coolant radiator (1) and hydraulic oil radiators (2) from
the engine with a water jet or a compressed air gun. Do not use
high-pressure cleaners.

Remove the screw (1) and pull on the handle (2) of the oil cool-
er (3) to fold it away from the coolant radiator.

Particular care must be devoted to the space between the radi-
ators because foliage often collects at this point.

After cleaning, check coolant radiator and hydraulic oil radiator
for damage.

Finally, fold the oil cooler (3) back and tighten the screw (1).
V-belt - check

Press in the V-belt (1) at position "A". The V-belt must give way
for approx. 7-9 mm (pressure: 6-7 kg). Adjust the V-belts if nec-
essary (page 156).

Check condition of the V-belt, it must not have any cracks or
other damage. Replace the V-belts if necessary.
The engine must be switched off and the key removed!
Do not attempt to grasp rotating or moving parts.
1
A
STOP