Input resistance:
appr. 5 kOhm
Minimum pulse length for the reset input:
5 ms
Switching level:
Standard level (HTL):
AC power supply: Low: 0 ... 4 V DC
High: 12 ... 30 V DC
DC power supply: Low: 0 ... 0,2 x U
B
[V DC]
High: 0,6 x U
B
... 30 V DC
4 ... 30 V DC level:
Low: 0 ... 2 V DC
High: 4 ... 30 V DC
Pulse shape:
any,
Schmitt Trigger inputs
Sensor supply voltage:
(Voltage output for external sensors)
SELV circuits, reinforced/double insulation
AC power supply: +24 VDC ± 15 % /100 mA
Ambient temperature:
–20 °C ... +65 °C
Storage temperature:
–25 °C ... +70 °C
Altitude:
to 2000 m
EMC:
Noise emission:
EN 55011 Class B
Noise immunity:
EN 61000-6-2
Device safety
Design to:
EN 61010 Part 1
Protection Class:
Class 2
Only for front side is classified as acces-
sible for the operator.
Application area:
Soiling Level 2
Pollution level II
Isolation:
Front:
double insulation
Rear side:
basic insulation
Signal inputs and sensor power supply:
SELV
Housing:
For front panel mounting
96 x 48 mm acc. to
DIN 43700,
RAL 7021, dark grey
Weight:
appr. 150 g
Protection:
IP65 (front, device only)
5
e
n
g
lis
h
6.5 End of programming
The programming routine is
repeated once more. The
values set until now can be
checked and modified.
The programming routine
wil be left and all values set
will be stored as new
parameters.
Afterwards the device is
ready for operation.
7. Technical data
Supply voltage:
AC power supply:
100..240 V AC max. 6 VA
50/60 Hz, Tolerance ± 10%
ext. fuse protection: T 0.1 A
DC power supply:
10...30 V DC/max. 50 mA
ext. fuse protection: T 0.1 A
SELV, CLASS II (Limited
Power Source)
ext. fuse protection T 0.25 A
Display:
6 digits, red 7 segment
LED display, height 14 mm
Data retention:
EEPROM
Inputs:
SELV circuits, reinforced/double insulation
Polarity:
Programmable, npn or pnp
for all inputs
Counting frequency:
AC power supply:
100..240 V AC ± 10%
Input level:
Standard
5V
typ. low level:
2,5V
1,0V
typ. high level:
22,0V
4,0V
Fmax:
60 kHz
50kHz
DC power supply:
24 12V DC 10 … 30V DC
Input level:
Standard
5V
typ. low level:
2,5V 2,0V
1,0V
typ. high level:
22,0 V10V
4,0V
Fmax:
60 20kHz
8kHz
!