Kuberg Freerider 2016, Руководство пользователя

Страница: 23 / 32

23
OWNER’S MANUAL
CAUTION!
The battery charger supplied with your Kuberg FREERIDER is for INDOOR use only.
IMPORTANT NOTES ABOUT BATTERY CHARGING
WARNING!
Do not cover the charger or its fan while charging, this can cause the charger to overheat and
may damage the charger and/or the bike’s electrical components.
Avoid any contact with water or other fluids while charging the battery. If the battery, charger
or any connections become wet, immediately unplug the charger and thoroughly dry all
components.
Only charge under the constant supervision of an adult. Children must not operate the
charger.
Keep the charger and the motorcycle away from flammable items during charging.
Never dismantle or disassemble the supplied charger. Never use the supplied charger for
any purpose other than charging a KUBER Freerider motorcycle.
BATTERY REMOVAL AND INSTALLATION
During normal use, KUBERG does not recommend removing the batteries from the Kuberg
Freerider. Should you need to replace the battery or remove it, KUBERG highly recommends tak-
ing the motorcycle to a certified technician or a Kuberg dealer. If you choose to remove or replace
the battery yourself, please follow the following instructions carefully:
1
Ensure the power switch is in off position.
2
Remove the seat by removing the two bolts under the rear fender and sliding the seat
backwards.
3
Unplug the battery connectors, one at a time. Note the direction and position of the bat-
teries, and the terminal for each wire. When it comes time to reconnect, each wire must be
connected to the correct terminal.
4
Push the remaining positive and negative wires to the front and sides of the bike, so the
battery pack can be carefully lifted out.
5
To re-install the batteries, reverse the above procedure.
WARNING!
Incorrectly connecting the battery wires to bike’s terminals may cause irreparable damage to
motorcycle’s electrical components.