Kuassa Caliburn, Инструкция по эксплуатации

Страница: 17 / 21

1. POWER : Turns the amp On or Off. If the amp is Off, the sound will go directly to the cabinets.
2. AMP TYPE A. JTM45 : Big, crunchy, and chimey.
B. JCM800 : Bold, fat, but still clear.
C. JCM900 : Heavy and dirty with long sustain.
3. GAIN : Sets the input gain & the amount of distortion. Rotate clockwise for more distortion.
4. LOW : Adjusts the low frequency tone.
5. MID : Adjusts the middle frequency tone.
6. HIGH : Adjusts the high frequency tone.
7. PRESENCE : Adjusts the presence level of the amp.
8. CHANNEL : Select between Clean and Lead channel.
9. BIAS : Sets the operating voltage of the power amplifier section.
10. SAG : Controls the amount of dropout/compression when a large signal and fast transient hits the power amp section.
11. MASTER : Adjusts the output level from this amplifier.
1 2
8
3 4 5 6 7
9 10
11
AMP FUNCTIONS