Kuassa Amplifikation Vermilion, Руководство пользователя

Страница: 10 / 20

SYNC
FX
ON/OFF
PANEL FUNCTIONS
1. POWER SWITCH: Turns the amp On or Off. If the amp is Off, the sound will go directly to the cabinets.
2. GAIN: Sets the input level & the amount of distortion. Rotate clockwise for more distortion.
3. LOW: Adjusts the low frequency tone
4. MID: Adjusts the middle frequency tone
5. HIGH: Adjusts the high frequency tone
6. PRESENCE: Adjusts the presence level of the amp
7. MASTER: Adjusts the output level from this amplifier
8. CHANNEL: Select between Clean and Lead channel
9. AMP TYPE:
• Amp A: tube amp, warm, thick overdrive, dynamic
•
Amp B: solid state, mellow, crunchy
•
Amp C: clean, sparkling, tight
10. TREM SPEED: This knob adjusts the rate/frequency of the tremolo effect. Clockwise rotation increases the tremolo speed
11. TREM DEPTH: This knob adjusts the depth of the tremolo effect. Clockwise rotation deepens the tremolo effect.
12. REVERB: Clockwise rotation will intensify the reverb effect
13. FX ON/OFF: When it is set to the “OFF” position neither the tremolo and reverb effect will be obtained.
14. SYNC: Turning the tremolo speed to be synchronized with the host ʼ s BPM or not
POWER
GAIN LOW MID
HIGH
PRES MASTER
A
B
C
CLN
OVD
TREM SPEED TREM DEPTH REVERB
1 2 3 4 5 6 7 8
10 11 12
9
14
13