KTR Kupplungstechnik
GmbH
D-48407 Rheine
DATAFLEX
®
85/...
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
49012 EN
5 of 18
6
Please note protection
mark ISO 16016.
Drawn: 03.09.13
Pz/Koe
Replaced
for:
KTR-N valid from 28.05.13
Verified:
22.10.13 Pz
Replaced by:
3 Storage
The
RADEX
®
-N
couplings are supplied in preserved condition. Both
DATAFLEX
®
and
RADEX
®
-N
can be stored
at a dry and covered place for 6 - 9 months.
!
C A U T I O N !
Humid storage rooms are not suitable.
Please make sure that condensation is not generated. The best relative air humidity is less
than 65%.
4 Assembly
The measuring shaft and the couplings are supplied as single pre-assembled structural components. Before
assembly the measuring shaft should be checked for completeness.
The position of the
DATAFLEX
®
is variable. The measurement system can be mounted horizontally as well as
vertically.
4.1 Components of DATAFLEX
®
torque measuring shaft
Components of
DATAFLEX
®
torque measuring shaft
Components of RADEX
®
-N coupling
Component Quantity
Designation
Component Quantity
Designation
1 1
DATAFLEX
®
torque measuring shaft
2
2
Flange
hub
3
2
Lamina
set
4
2
Clamping ring hub with
clamping ring
5
2
Setscrew DIN EN ISO 4029
Illustration 3: DATAFLEX
®
85 - torque measuring shaft with RADEX
®
-N
