KTR Kupplungstechnik
GmbH
D-48407 Rheine
DATAFLEX
®
85/...
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
49012 EN
1 of 18
6
Please note protection
mark ISO 16016.
Drawn: 03.09.13
Pz/Koe
Replaced
for:
KTR-N valid from 28.05.13
Verified:
22.10.13 Pz
Replaced by:
DATAFLEX
®
Torque measuring shaft type 85/…
DATAFLEX
®
is a maintenance-free torque measuring shaft with integrated speed measurement.
Combined with the steel lamina coupling
RADEX
®
-N
the complete system forms a torsionally stiff,
double-cardanic coupling with integrated measuring shaft.
Table of contents
1 Technical
data
2 Advice
2.1 General
advice
2.2
Safety and advice symbols
2.3
General hazard warnings
2.4 Intended
use
3 Storage
4 Assembly
4.1
Components of DATAFLEX
®
torque measuring shaft
4.2
Advice regarding finish bore
4.3
Displacements - alignment of the torque measuring shaft
4.4
Assembly of the hubs
4.5
Assembly of the RADEX
®
-N clamping ring hubs on the DATAFLEX
®
torque
measuring shaft
4.6
Assembly of the hubs on driving and driven side
4.7
Assembly of the lamina sets
4.8
Tightening torque of the fitting screws
4.9
Advice for assembly of the DATAFLEX
®
torque measuring shaft
4.10
Technical
description
4.11
Services, customer service addresses
5
EC certificate of conformity
