KTR Kupplungstechnik
GmbH
D-48407 Rheine
C L A M P E X
®
K T R 1 0 5
m o u n t i n g i n s t r u c t i o n s
KTR-N
sheet:
edition:
40827 E
3
1
Gezeichnet:
23.07.04 Sha/Hg
Ersatz für:
Schutzvermerk
ISO 16016 beachten.
Geprüft:
23.07.04 Sha
Ersetzt durch:
Assembly
Continuation:
•
Tighten the clamping screws evenly and crosswise. Increase the tightening torque step by step.
This procedure must be repeated until the tightening torque indicated in table 1 is reached with all
clamping screws.
Table 1:
type of clamping set
105
screw
size
M
M2,5 M3 M4 M5 M6 M8
tightening torque T
A
[Nm] 1,2 2,2 4,9 10 17 41
A T T E N T I O N !
During the assembly there can be a slight axial displacement of the hub opposite to
the shaft in case of KTR 105.
Disassembly
STOP
D A N G E R !
Loosened or falling drive parts can cause injuries to persons or damages to the
machines.
Safe the drive parts before the disassembly.
•
Loose all clamping screws evenly one after the other and unscrew them.
•
Screw the clamping screws into the threads of the internal ring (component 2).
•
Tighten the clamping screws evenly and crosswise. Increase the tightening torque step by step
until the external ring (component 1) and the internal ring (component 2) are separated.
•
Remove the unscrewed clamping set between shaft and hub.
picture 2: unscrew the clamping set KTR 105
!
C A U T I O N !
In case of non-observance of these hints or in case of non-considerance of the
operating conditions regarding the selection of the clamping set, the function of
the clamping set can be influenced.
Disposal of waste:
Defective clamping sets must be cleaned and scrapped.
