CLAMPEX
®
KTR 150
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40812 EN
5 of 9
7
Please observe protection
note ISO 16016.
Drawn:
2017-11-29 Shg/Jh
Replacing:
KTR-N dated 2017-04-27
Verified:
2017-11-29 Shg
Replaced by:
STOP
With assembly and disassembly of the clamping set it has to be made sure that the entire
drive train is secured against accidental switch-on. You may be seriously hurt by rotating
parts. Please make absolutely sure to read through and observe the following safety indica-
tions.
All operations on and with the clamping set have to be performed taking into account "safety first".
Please make sure to switch off the power pack before you perform your work on the clamping set.
Secure the power pack against accidental switch-on, e. g. by providing warning signs at the place of switch-on
or removing the fuse for current supply.
Do not reach into the operation area of the machine as long as it is in operation.
Please secure the rotating drive components against accidental contact. Please provide for the necessary
protection devices and covers.
You may only assemble and disassemble the clamping set if you
have carefully read through the operating/assembly instructions and understood them
had technical training
are authorized by your company
The clamping set may only be used in accordance with the technical data (see table 1). Unauthorized modifica-
tions on the clamping set are not admissible. We will not assume liability for any damage that may arise. In the
interest of further development we reserve the right for technical modifications.
The clamping set described in here corresponds to the technical status at the time of printing of these operat-
ing/assembly instructions.
The clamping sets are supplied in preserved condition and can be stored at a dry and covered place for 6 - 9
months.
!
Humid storage rooms are not suitable.
Please make sure that condensation is not generated.
!
In order to avoid any injuries and any kind of damage please always make use of proper
transport and lifting equipment.
The clamping sets are packed differently each depending on size, quantity and kind of transport. Unless other-
wise contractually agreed, packaging will follow the in-house packaging specifications of KTR.
2
Advice
2.3 General hazard warnings
2.4 Intended use
3
Storage, transport and packaging
3.1 Storage
3.2 Transport and packaging
