KTM RC 125 2019, Руководство пользователя

Страница: 195 / 255

COOLING SYSTEM 16
193
V00683-10
Main work
–
Position the motorcycle upright.
–
Place an appropriate container under the engine.
–
Remove screw
1
.
–
Take off the radiator cap.
–
Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug, water
pump drain hole M6 10 Nm (7.4 lbf ft)
16.6 Filling/bleeding the cooling system
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.