KTM RC 125 2019, Руководство пользователя

Страница: 214 / 255

19 CLEANING, CARE
212
–
After cleaning, ride the vehicle a short distance until the
engine warms up.
Info
The heat produced causes water at inaccessible loca-
tions in the engine and on the brake system to evapo-
rate.
–
Push back the sleeves of the handlebar controls to allow any
water that has penetrated to evaporate.
–
After the motorcycle has cooled down, lubricate all moving
parts and pivot points.
–
Clean the chain. ( p. 110)
–
Treat bare metal (except for brake discs and the exhaust sys-
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
(
p. 242)
–
Treat all painted parts with a mild paint care product.
Perfect finish and high gloss polish for paints ( p. 241)
Info
Do not polish parts that were matte when delivered as
this would strongly impair the material quality.