CONTROLS
14
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
5.14
Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Press the button
briefly and repeatedly until
CLK
appears at the bottom right of
the display.
–
Press the button
for 3 - 5 seconds.
The hour display flashes.
–
Set the hour display with the button
and/or button .
–
Press the button
briefly.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing the
button
and the button .
Info
The seconds can only be set to zero.
–
Press the button
for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
5.15
Adjusting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Press the button
briefly and repeatedly until
H
appears at the bottom right of the
display.
–
Press the button
for 3 - 5 seconds.
The Setup menu is displayed and the activated functions are shown.
–
Change to the desired function by pressing the button
briefly.
The selected function flashes.
Activating a function
–
Press the button .
The symbol remains on the screen and the display changes to the next
function.
Deactivating the function
–
Press the button .
The symbol on the screen goes out and the display changes to the next
function.
–
All desired functions are activated or deactivated accordingly.
–
Press the button
for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
