KTM Freeride 250 R EU, Руководство пользователя

Страница: 43 / 115

12 SERVICE WORK ON THE CHASSIS
41
12.8 Installing the fork protector
B02281-11
–
Position the fork protection on the right fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
B02280-11
–
Position the fork protection on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws  .
12.9 Removing the lower triple clamp
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. ( p. 75)
–
Raise the motorcycle with the lift stand. ( p. 38)
–
Remove the front wheel. ( p. 68)
–
Remove the fork legs. ( p. 39)
–
Remove the front fender. ( p. 45)
C00902-01
Main work
–
Remove the cable holder on both sides in front of the radiator.
B01738-10
–
Remove screw

.
–
Remove screw  , take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
M00536-11
–
Remove O-ring  . Remove protective ring  .
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.