KTM F9903QE, Инструкции по установке

Страница: 6 / 19

2 SETUP
4
–
First bolt the handlebar support with screws
2
onto the longer, higher side of the
handlebar supports so that both parts touch.
–
Tighten screws
2
evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
S01186-10
–
Tighten screws
3
and
4
of the controls.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, combination switch, right M5 3.5 Nm
(2.58 lbf ft)
–
Mount right handlebar weight, tighten screw.
Guideline
Screw, handlebar weight M6 10 Nm (7.4 lbf ft)
–
Check the throttle grip for smooth operation.
E00278-01
–
Mount and tighten the rear mirror on both sides.
E00279-10
–
Position windshield
5
.
–
Mount and tighten screws 6 .
Guideline
Screw, windshield M5 3.5 Nm
(2.58 lbf ft)
E00277-01
–
Tape on the protective plastic sheet for the swingarm.
–
Remove the cable ties of the rider footrests.
E00281-10
–
Mount splash protector 7 with screws 8 on license plate holder 9 .
Guideline
Remaining screws, chassis EJOT PT ® K50x12 1 Nm (0.7 lbf ft)