KTM F9903Q2, Инструкции по установке

Страница: 6 / 20

2 SETUP
4
S01846-10
–
Position the handlebar.
The markings of the handlebar scale are located centrally between the handle-
bar clamp.
–
Position the handlebar clamp. Mount and tighten the screws evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
S01847-10
–
Position brake assembly on the handlebar.
–
Position brake assembly clamp on the handlebar.
Clamp catch engages in the combination switch.
–
Mount and tighten screws
7
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
S01848-10
–
Position clutch assembly on the handlebar.
–
Mount and tighten screw
8
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
S01849-10
–
Position the combination instrument support on the handlebar.
–
Mount screw
9
but do not tighten yet.
–
Move the combination instrument into the desired position.
–
Tighten screw 9 .
Guideline
Screw, combination instrument clamp-
ing M6 2 Nm (1.5 lbf ft)
–
Plug in the connector
bk
with sleeve.
S01850-10
–
Mount and tighten the rear mirror on both sides.
S01851-10
–
Mount splash protector bl with screws bm on license plate holder bn .
Guideline
Remaining screws, chassis EJOT PT ® K50x12 1 Nm (0.7 lbf ft)