KTM F8203U2, Инструкции по установке

Страница: 42 / 49

3 WORK
40
3.27 Setting the kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1 , TR2 , A1 , A2 and S1 are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
–
Repeatedly press the button briefly until H appears at the
bottom right of the display.
–
Press the button for 2
–
3 seconds.
The Setup menu is displayed and the active functions are
shown.
–
Repeatedly press the button briefly until Km/h / Mph flashes.
Adjusting the Km/h
–
Press the button .
Adjusting the Mph
–
Press the button .
–
Wait 3 - 5 seconds.
The settings are stored.
Info
If no button is pressed for 10
–
12 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
3.28 Setting the combination instrument
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Repeatedly press the button briefly until H appears at the
bottom right of the display.
–
Press the button for 2
–
3 seconds.
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10
–
12 seconds, the settings
are automatically saved.
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
–
Repeatedly press the button briefly until the desired func-
tion flashes.
The selected function flashes.