3
SERVICE WORK ON THE CHASSIS
13
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regu-
lations.
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, and charging time are exceeded, the battery will be destroyed.
If the battery is depleted from starting the vehicle repeatedly, the battery must be charged immediately.
If the battery is left in a discharged state for an extended period, it will become over-discharged and sulfated, destroying the
battery.
The battery is maintenance-free.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Fold the seat up. (
–
Remove the shock absorber. (
B02295-10
Main work
–
Remove screw
.
–
Take off fastening plate
.
311910-10
–
Connect the battery charger to the battery. Set the battery charger.
Alternative 1
Battery charger
XCharge-professional
EU (00029095050)
Alternative 2
Battery charger
XCharge-professional
US (00029095051)
Alternative 3
Battery charger
XCharge-professional
GB (00029095052)
Alternative 4
Battery charger
XCharge-professional
CH (00029095053)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
B02295-10
–
Position the battery in the battery compartment.
Info
Ensure that the battery cable is correctly routed.
–
Attach fastening plate
.
–
Mount and tighten screw
.
Finishing work
–
Install the shock absorber. (
