KTM F7103U6, Инструкции по установке

Страница: 35 / 47

WORK 3
33
3.22 Installing the headlight mask with the headlight
E00900-11
Main work
(150 EXC TPI EU)
–
Join plug-in connectors
1
.
E00357-11
(150 XC
‑
W TPI US)
–
Join plug-in connector
1
.
E00899-11
–
Position the headlight mask and secure it with rubber
straps
2
.
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
Finishing work
–
Check the headlight setting. ( p. 33)
3.23 Checking the headlight setting
400726-10
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance B
5 cm (2 in)
–
Position the vehicle vertically at a distance
A
away from the
wall.
Guideline
Distance
A
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.