KTM F6375T5, Руководство пользователя

Страница: 19 / 147

CONTROLS 6
17
6.11 Cold start button
V01649-10
The cold start button
1
is fitted on the side of the throttle valve
body.
If the engine is cold and the ambient temperature is low, the
electronic fuel injection system extends the injection time. To help
the engine burn the increased fuel quantity, it must be supplied
with additional oxygen by pulling the cold start button.
Info
If the engine is warm, the cold start button must be deacti-
vated.
Possible states
• The cold start button is activated
–
The cold start button is
pulled out all the way and turned by a ¼ turn.
• The cold start button is deactivated
–
A further ¼ turn returns
the cold start button back to the basic position.
6.12 Idle speed adjusting screw
V01649-11
The idle setting of the throttle valve body substantially influences
the vehicle’s starting behavior, a stable idle speed, and the vehi-
cle’s response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an
engine with the idle speed set incorrectly.
The idle speed is adjusted using the idle speed adjusting
screw
1
.
Info
If the idle speed is high, the engine is slow to run, the
engine brake is low and the throttle response is aggressive,
the adjustment screw must be turned clockwise.
If the idle speed is low, the engine is running fast, the
engine brake is high and the throttle response is not clean,
the adjusting screw must be turned counterclockwise.
6.13 Shift lever
401950-10
Shift lever
1
is mounted on the left of the engine.